Apoxie® Clay is a permanent, self-hardening, waterproof clay product most commonly used when the shiny finish of standard epoxies is not desirable.
-
Measure equal parts of A and B components. Mix and knead together two minutes or until thoroughly combined and a uniform color is achieved. Note: Incomplete mixing will give poor results.
-
Apoxie® Clay is now ready to use. It's working time is approximately two to three hours.
Smooth or texture with fingers or tools and water or Aves® Safety Solvent before set up. Paint wet or dry.
-
Clean up with Aves® Safety Solvent or soap and water.
-
Note: Curing time is 24 hours to be waterproof and for hard finishing.
-
Refrigerating or freezing will extend shelf life.
Caution:
Keep Out of Reach of Children
Wear protective gloves when mixing.
Wear goggles and dust mask when sanding and grinding.
Seal containers when not in use.
|