Instructions for Installing Flexible Turkey Necks on to Freeze Dried Heads

 

Note: The flexible turkey necks are made longer so that they may be trimmed to fit the freeze-dried Turkey head.

  1. Cut the freeze-dried turkey head foam insert off, leaving 3/8" of the insert sticking below the wattles.

  2. Measure from the back of the skull to the end of the insert on the freeze-dried head.

  3. Take the measurement from step 2 and deduct that measure from twelve inches. That number will represent the approximate length that the artificial neck shoulder should be cut at.

  4. Carve the foam insert on your freeze-dried head down to the same diameter as the newly cut off flexible neck. There should be a smooth transition from the head insert to the artificial neck.


  Go Back