|
Fixit® Sculpt is an excellent product for antler repair and detailed sculpting.
-
Measure equal parts of A and B components. Mix and knead together two minutes or until thoroughly combined and a uniform color is achieved. Note: Incomplete mixing will give poor results.
-
Fixit® Sculpt is now ready to use. It's working time is approximately three to four hours.
Smooth or texture with fingers or tools and water or Aves® Safety Solvent before set up. Paint wet or dry.
-
Clean up with Aves® Safety Solvent or soap and water.
-
Note: Curing time is 24 hours to be waterproof and for hard finishing.
-
Refrigerating or freezing will extend shelf life.
Caution:
Keep Out of Reach of Children
Wear protective gloves when mixing.
Wear goggles and dust mask when sanding and grinding.
Seal containers when not in use.
|